Lowering yourself while working on a Laptop is very important before repairing or upgrading your Laptop. If you touch any sensitive part by mistake, it may damage the parts of your Laptop.
For example, memory chips, hard drives, and picture cards can be destroyed. Laying down stops your body from functioning as a dry electric source.
The Battery Must Be Removed
Before you do anything on your Laptop, you should make sure that your Laptop battery is properly discharged. Therefore, you will not face moving problems while working on your Laptop.
Just unplug the battery and make sure there is no electrical connection to the Laptop. It is the first step in putting yourself down when working on a Laptop.
The Place Should Be Clean
The important thing is after removing it, the battery is completely clean and cleans your work properly. The workplace should be stable because many things like rolling desks, chairs, and cats are a constant source of electricity.
Plastic items are also a constant source of electricity. Therefore, you should be careful if these things surround you because a little carelessness can cause big problems and unexpected.
Never Wear Strong Friendly Clothes
Clothes also create Static electricity, which is unknown to all. It is rare to say, but clothes attract dry electricity.
Textiles, such as Wool fabrics and other types of synthetic fabrics, are a great source of constant energy. Cotton fabrics are great for working on a laptop, so you should use cotton fabrics instead.
If you do not have cotton clothes, you can wash your clothes with a dryer sheet, as it can reduce the amount of electricity stuck in the clothes when working on a laptop.
The surface should be hard enough
Another important thing is that the workplace should be hard enough to position your Laptop well without the problem of measuring like a countertop, wooden table, etc., which will be ready to work on the Laptop.
A wooden floor and a tile floor will look good too. You will never put your Laptop on the carpets, towels, and blankets. It is also an important step in putting yourself down when working on a Laptop.
You Must Walk
Before you start working on a Laptop, make sure you have no shoes. Because standing or sitting on a carpet or socks, can give you money, it is useless when working on a laptop because it can cause you problems.
Instead of using them, you should use tiles, wood, and other durable materials, and never forget not to wear shoes. If, you are unable to work in a solid place or are not available in your home to work.
Then walk barefoot every 2 to 3 minutes, or you can use rubber slips, which will break your foot contact with the carpet, but your rubber slipper should be enough to discontinue foot contact with the carpet.
You must put yourself down while working on a laptop. You must have anti-static pockets to place Laptop components on them. It will help reduce dry electricity from portable computer components.
You can keep parts of your laptop in it as long as it is not ready to be installed on a portable computer. It will reduce your workload on the laptop.
Moisture in Dry Climate
Ignorance of this world can cause great trouble, as well as accidents. Working on a laptop should not be in humid weather. You must work on a Laptop in an area of less than 35 percent humidity.
Cold winter weather is bad for working on a portable computer. Because it can cause great harm, but you can change the environment or the percentage of humidity in your room by hanging wet clothes in front of a fan or radiator.
An Air Conditioner with a high setting is dangerous for performance on the Laptop. You can buy a humidifier, but you have a choice. If you cannot afford it, there is no need to buy it.
How to Do It
Grounding Works
Do you want to protect yourself? Dry electricity is generated by the transition from you to the logical part of the computer that you will need to remove the static to something that lasts longer.
In many high-end events, this is a metal object that meets the ground rather than meets a series of downward objects.
Anti-Static Wrist Band
The wristband is easily available in the market and online store at a cheap and low price. All you need to do is attach a strong wrist strap to your wrist and another end that hangs down with a piece of unpainted metal like a screw.
The wristband is available in two types at its ends such as a loop or clip. The loop is as easy to deal with as comparing a clip. Because it is easy to hang. Must be in US code.
Never buy a wireless bracelet since it is ineffective. It is important to buy it before you start working on the laptop and put it down.
Contact It With A Stabilized Steel Thread
Lastly, if you do not work in a tight environment, then this process will be much better for you. You just need to attach the wire cord to your wrist or toe and attach the other part to the unpainted metal part.
Therefore, before starting work, make sure that the device is fully connected on both sides.
Final Words
So, here I can conclude that if you want to be stable when working on a laptop. First, you need to know its basics and requirements as well. Second, you should know how to use its components.
How do you ground a laptop?
If you live on the first floor, a wire long enough to get the pole out of a window and into the ground can be used. If not, fill a plant pot with soil and place the pole inside. When you connect the charger pin to your laptop, it becomes grounded.
What can I touch to ground myself?
A grounded object, such as a water pipe, wall, or wood table, has a direct conductive path to the earth. When working with computers, the best way to ground yourself is to touch the metal box on the outside of your computer’s power supply before unplugging it.
How do you keep yourself grounded when building a computer?
Tying a conductive wire, such as copper, around one’s toe or wrist and then tying the other end around a grounded, unpainted metal object is a common technique for keeping oneself grounded. This is ideal if you already have the materials and don’t have access to a hard surface.
Can static electricity kill your PC?
Electrostatic discharge is a threat to all electronic components in a computer. The actual occurrence of ESD component damage is relatively low. When working with electronic components, however, it is critical to exercise caution. Wear a wrist strap that prevents static electricity.
Related Posts
What Is The Best Laptop With DVD Drive
How To Connect A Logitech Bluetooth Keyboard To A Samsung Tablet?